Short and long parts of tie-down belts
Long belt parts and short parts with a ratchet are spare parts for repairing the tension belt when it is damaged or worn.
Long and short parts for tensioning belts: maintainability and extended service life
Spare elements help to quickly restore a belt with a tensioner in case of rupture, abrasion, or damage from sharp edges of the load. They serve as components of fastening systems for transporting various goods by trailers, trucks, trailers, airplanes, railway platforms, wagons, ships and other vehicles. Long elements are suitable for independent use.
Short section of tie-down strap with ratchet mechanism
Short parts for tensioning belts consist of a piece of tape with a tensioner on one side and a hook on the opposite side. High-quality components ensure minimal stretching (3% or 4% depending on the model) and stability under peak loads. The short part of the ratcheting strap has a safety factor of 2:1.
Advantages of products from the manufacturer LOAD-TECH:
- affordable price;
- variability of permissible load;
- quick restoration of a damaged belt;
- resistance to moisture, ultraviolet radiation and temperature changes.
You can buy the short part of the tensioning belt in Standard, Garant, Premium versions for working loads of 0.8 t, 1.5 t, 3 t, 5 t, 7.5 t and 10 t. The products comply with the EN 12195-2 standard and are supplied with quality certificate.
Long parts for tie-down straps
The long part of the tension straps is a piece of polyester tape with a sewn hook. Strength, minimal elongation (3% or 4%) and durability are ensured by high quality materials and compliance with the requirements of the EN 12195-2 standard.
Advantages of products from the manufacturer LOAD-TECH:
- low price;
- resistance to moisture, UV, temperature changes;
- maximum strength in relation to width;
- maintaining integrity under peak loads.
You can buy long parts for tensioning belts with belt widths of 25, 38, 50, 75, 100 mm and lengths from 1.5 to 14 m. Depending on the design, the product can withstand loads of 0.8 t, 1.5 t, 3 t, 5 t, 7.5 t, 10 t.
Reliable spare parts for tensioning belts from LOAD-TECH
The manufacturer LOAD-TECH supplies fastening and rigging devices with quality certificates and a guarantee. The short and long parts of the tensioning belt are tested for strength and compliance with the declared parameters. Delivery is carried out throughout Ukraine.
