Safety harness 2PL-K (PLK2)

Safety harness 2PL-K (PLK2)

  • Combined safety harness with shoulder and leg straps;
  • Material: polyamide, polyester, steel with a protective coating;
  • Standard:EN 361-2001; EN 358-2001;
  • Static breaking load: not less than 15 kN;
  • Sizes (waist circumference): S (640mm - 1000mm); M (850mm - 1300mm); L (1100mm - 1500mm);
  • Manufacturer: LTD LOAD-TECH, Ukraine Украина

More details

Select attributes:


914,76 грн.

869,02 грн.

Reduced price!


Combined webbing safety harness PLC2 is designed to be used as a support tool to protect workers in the event of a fall from a height during installation and repair work according to the "Rules for labor protection during work at height" DNAP 0.00-1.15-07.

When using a sling with a shock absorber to the back attachment point of the PLC2 belt, it can be used as a personal protective equipment and for picking up in the event of a fall from a height.

This model is used for safe work at heights.

PLC2 safety harness Options:

PLC2 belt consists of webbing for legs, dorsal buckle, chest membrane, sash, belt, shoulder straps, buckles for adjusting the length of the straps. The dorsal and front safety nodes are designed to secure the sling with a shock absorber. Depending on the design, the front safety unit is made in the form of two loops (version No. 1), or it can be equipped with a carabiner of the "eye" type (version No. 2). The belt is additionally equipped with lateral safety attachment points, which are intended only for holding in the workplace, as well as loops and half rings for auxiliary fastening of the working tool.

The PLC2 harness is offered in two versions: with a carabiner of the "eye" type - version No. 2 and without it - version No. 1

Safety slings are not included.